Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Attention Everyone, we have 2 new Sponsors!
Machtech Direct and P&K Cub Cadet (See Links above)


Go Back   Only Cub Cadets > Cub Cadets > Tractor pullers using Cub Cadets!
Reload this Page Spread frame repower
Register FAQ Calendar

Notices

Reply
Page 1 of 3 1 23
 
Thread Tools Display Modes
  #1  
Old 02-21-2023, 06:38 PM
Cadetpuller Cadetpuller is offline
Member
  
Join Date: Feb 2023
Location: AL
Posts: 34
Default Spread frame repower
I have a 1989 CC 1050 spreadframe. Which to my understanding is essentially a white and yellow 582 with a kohler magnum 10hp.

I also have a source for a K341 that I want to use to repower the 1050. I don't know yet if it is a narrow block or a wide block. From another forum I read it doesn't really matter. If it is a narrow block then I could use a cradle from a 1282 or 1204, and if it a wide block ???? I don't know. Has anyone done this swap on a 582? Will it work?

Thanks Matt
Reply With Quote
  #2  
Old 02-22-2023, 11:34 AM
ironman's Avatar
ironman ironman is offline
Grand Member
  
Join Date: Sep 2012
Location: Pennsylvania
Posts: 2,285
Default
I can't speak for fitment, but have you considered the facts that:

1. The Magnum is magneto ignition, the K341 is coil & points.
2. The Magnum has internal voltage regulation, the K341 is external.
3. The Magnum is equipped with a starter, the K341 uses a starter/generator for starting and charging.

All wiring issues.
Reply With Quote
  #3  
Old 02-22-2023, 12:39 PM
DeltaCub's Avatar
DeltaCub DeltaCub is offline
Grand Member
  
Join Date: Jul 2014
Location: Ohio
Posts: 1,551
Default
ironman....the 1650 used k-341 that had a flywheel driven starter and a stator with a rectifier/regulator. The 169 used a starter/generator.
__________________


Queen Of The Quietlines!
Reply With Quote
  #4  
Old 02-22-2023, 12:56 PM
Cadetpuller Cadetpuller is offline
Member
  
Join Date: Feb 2023
Location: AL
Posts: 34
Default
Attached are pics of the k341. Can anyone tell me if this has a flywheel driven started or starter/generator? I believe it to be a flywheel driven 1987 k341. As far as having points or internal/external regulator I don't know. Any help would be appreciated. Also still trying to find out if this repower will work.
Reply With Quote
  #5  
Old 02-22-2023, 01:11 PM
R Bedell R Bedell is offline
Inactive Member
  
Join Date: Mar 2007
Location: Michigan
Posts: 13,693
Default
The K341S-71309 was an engine built for the WW Grainger Company as an aftermarket replacement. It is a 1987 model with an Electric Starter.
__________________
[B]Roland Bedell[/B]

CC Models: 100, 105, 1450, 782, (2) 784, & 2072

[SIZE="4"][B][COLOR="Red"]Buy:[/COLOR][COLOR="Blue"] Made in the USA[/COLOR][/B] [/SIZE]:American Flag 1:
Reply With Quote
  #6  
Old 02-22-2023, 02:44 PM
ironman's Avatar
ironman ironman is offline
Grand Member
  
Join Date: Sep 2012
Location: Pennsylvania
Posts: 2,285
Default
Quote:
Originally Posted by DeltaCub View Post
ironman....the 1650 used k-341 that had a flywheel driven starter and a stator with a rectifier/regulator. The 169 used a starter/generator.
I didn't even think of that. I was assuming a 169's K341. I stand corrected, thank you!
Reply With Quote
  #7  
Old 02-22-2023, 03:27 PM
DeltaCub's Avatar
DeltaCub DeltaCub is offline
Grand Member
  
Join Date: Jul 2014
Location: Ohio
Posts: 1,551
Default
Quote:
Originally Posted by ironman View Post
I didn't even think of that. I was assuming a 169's K341. I stand corrected, thank you!
Ironman, you just had a brain fart....you know your stuff!

Cadetpuller, that engine will require a great deal of modification to work in a 1050. Also, the crankshaft may be the wrong size for the PTO clutch. Something else too, the oil pan is not one that is used in a typical Cub Cadet.
__________________


Queen Of The Quietlines!
Reply With Quote
  #8  
Old 02-22-2023, 03:52 PM
Cadetpuller Cadetpuller is offline
Member
  
Join Date: Feb 2023
Location: AL
Posts: 34
Default
Quote:
Cadetpuller, that engine will require a great deal of modification to work in a 1050. Also, the crankshaft may be the wrong size for the PTO clutch. Something else too, the oil pan is not one that is used in a typical Cub Cadet.

I'm not worried about the PTO clutch as it will only be used for pulling. Does the K341 share a block with anything that cub cadet did use that I could swap oil pans with?
Reply With Quote
  #9  
Old 02-22-2023, 04:09 PM
DeltaCub's Avatar
DeltaCub DeltaCub is offline
Grand Member
  
Join Date: Jul 2014
Location: Ohio
Posts: 1,551
Default
the block is flanged at the bottom to accommodate a standard oil pan/mounting surface. I suppose you could make something work to mount this engine. the flywheel. however. is not set up to connect a driveshaft.
__________________


Queen Of The Quietlines!
Reply With Quote
  #10  
Old 02-22-2023, 04:13 PM
Cadetpuller Cadetpuller is offline
Member
  
Join Date: Feb 2023
Location: AL
Posts: 34
Default
Quote:
Originally Posted by DeltaCub View Post
the block is flanged at the bottom to accommodate a standard oil pan/mounting surface. I suppose you could make something work to mount this engine. the flywheel. however. is not set up to connect a driveshaft.
Thanks for the info. Sounds like something beyond my skill set and budget. I'm just building something for fun, not competition.
Reply With Quote
Reply
Page 1 of 3 1 23

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:27 AM.

www.onlycubcadets.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.