PLEASE PATRONIZE OUR SPONSORS!
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Garden Plow Guidance
Started looking for a used garden plow for my cub. I know nothing about plows.
I found one but the setup seems a little different than the Brinly ones I see elsewhere. The angle adjustment is by the front of the plow instead of in the rear. Anyone used a plow like this? Should I just keep looking for a brinly or other brand? Any suggestions would be appreciated. Thanks IMG_5008.jpg
__________________
1512 with CADloader 507, CADdigger 508 and 3 pt 1711 with KT17 782 with KT17 and 3 pt 104 |
#2
|
||||
|
||||
I think that is a Sears or Roper plow.. It should work just as well as the Brinly.. doesn't really matter where the adjustment is.. That controls the angle on the point and helps determine how deep the plow runs.. If you shorten that upper link the plow will run deeper.. if you lengthen it should run more shallow.. Same principle on the brinly or any turn plow (moldboard plow) for that matter! They are easy to use and a lot of fun to plow with when set up and adjusted correctly!
__________________
Jay 40 years of Using and playing with IH Cub Cadets! Proud owner of the following: Cub Farmall, Super A Farmall, Original, (2)70's, 72, 100, 102, 123, 105, 125, 127, 108, 128, 1450, (3)782's, Yellow 982, 1782, "Sam's" 2182, M Farmall and a #7 trailer |
#3
|
||||
|
||||
At least hook it up, and see how it "looks" on fit. But as Jay said, there all the same, for the most part.
Shine the face up, oil up the adjuster, and give it a whirl...
__________________
Make the best of each day , Todd Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439 (O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk They can't all be turn key! |
#4
|
||||
|
||||
I've seen numerous plows like that at the different plow days that I have been to and they work just as good as a Brinly. If the price is right grab it. It's all a matter of getting them dialed in.
__________________
149,682,1641,1711 with a 12hp in it 1 8" brinly plow 1 10" brinly plow 451 snow blower,H-48 International snow thrower 42" york rake with fold down grader blade. |
#5
|
|||
|
|||
Asking $100 but they have been trying to sell it for a month.
__________________
1512 with CADloader 507, CADdigger 508 and 3 pt 1711 with KT17 782 with KT17 and 3 pt 104 |
#6
|
|||
|
|||
I owned and plowed with a plow like that one. My plow has a Sears id tag on it.
It is a good plow as long as the point is good and the coulter turns. A good way to if it has a good point is to put the plow on a cement floor and check to see how much gap there is behind the point. Bad thing about the plow there is no replacement parts for it.
__________________
Project Uncle Dick Cub Cadet 70 http://www.onlycubcadets.net/forum/s...ght=Uncle+Dick |
#7
|
||||
|
||||
That is a good price.. you won't find a Brinly that cheap
__________________
Jay 40 years of Using and playing with IH Cub Cadets! Proud owner of the following: Cub Farmall, Super A Farmall, Original, (2)70's, 72, 100, 102, 123, 105, 125, 127, 108, 128, 1450, (3)782's, Yellow 982, 1782, "Sam's" 2182, M Farmall and a #7 trailer |
#8
|
|||
|
|||
Thanks for all your help!
I picked up the plow today. Turned out to be in pretty good shape. Angle adjuster was frozen but after some pb blaster and a pipe wrench was able to free up the adjuster. Time to weld up a sleeve hitch adaptor for tractor!
__________________
1512 with CADloader 507, CADdigger 508 and 3 pt 1711 with KT17 782 with KT17 and 3 pt 104 |
#9
|
|||
|
|||
__________________
1512 with CADloader 507, CADdigger 508 and 3 pt 1711 with KT17 782 with KT17 and 3 pt 104 |
#10
|
||||
|
||||
Glad you picked it up!! Time to turn some dirt and shine it up!! and send us some pictures!
__________________
Jay 40 years of Using and playing with IH Cub Cadets! Proud owner of the following: Cub Farmall, Super A Farmall, Original, (2)70's, 72, 100, 102, 123, 105, 125, 127, 108, 128, 1450, (3)782's, Yellow 982, 1782, "Sam's" 2182, M Farmall and a #7 trailer |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.