Originally Posted by Oak (Post 229669)

Here is a pic of the part...I think they mark it up just a little.

Attachment 44777


length is 0.837"
small tube OD is 0.336"
small tube ID is 0.249"
large center spacer part that is centered is 0.563" OD and is 0.118 thick

me not a machinist:bash2:

let me know if you guys want anymore pics. this should be pretty easy to make.

Originally Posted by Rescue11 (Post 229765)

Wish the post was here 2 months ago. Bought two stubs and 6 o-rings. After tax and shipping... $67.00 :bash: so sam if you would let us kno when you get those built! :beerchug:

Originally Posted by KayakDon (Post 229687)

Thanks to all your help. I bought the needed valve from SamMac, and soon I will be asking about the needed lines. Are the hydro parts from a 3200GT or any newer tractor adaptable for my 2182?
I did find the 711-3294 part for $9.71 at http://www.cubcadetpartsnmore.com/ They seem to have good prices on belts. Don

Originally Posted by Sam Mac (Post 229784)

Guys

I'm going to print out this pic, take to the machine shop and get an idea what it will cost. It will have to be less than $9.71. Thanks Oak for the info.

Originally Posted by Sam Mac (Post 229846)

Checked with the machine shop. We can have them made for about $8.00. Let me know if any of you want some, we need to order at least 10.

Originally Posted by Rescue11 (Post 229926)

I'll do 3. Can paypal you. Thanks in advance.

Originally Posted by J-Mech (Post 229977)

I think two of the rings are Teflon, and two are rubber. I looked it up, but don't remember. That's how almost all valves assembled like that are. Helps hold the pressure I guess.