Plow question
 

A guy is selling a plow but doesnt know if its a narrow frame or wide. He said the measurements of the frame are 10 1/4". Does anyone know if this is a narrow or wide frame plow?

it will fit both. all you need to know is if it a sleeve hitch or 3 point.

CubNub,
Sorry I have to ask, is this a front blade snow type plow or a moldboard garden plow? If a front plow then: If the forks coming back under the tractor are same width it would be for a NF. If the forks narrow as they come under the tractor it is for a WF. If it's a moldboard it should fit both as Doug mentioned.
Again pictures would be great.
Regards,
Chris

Its a front snow plow. I dont know why I didnt do this to begin with but heres some pics.

Yea that helps!:)
I would say you have a nice narrow frame blade there. Do you own it yet? Looks like it will clean up real nice. I should be out working on mine right now!
Regards,
Chris

didnt think,,,, sorry. the front blade !!! Im just used to calling a blade a blade and a plow a plow.

Chris is correct. That's a NF blade. If you have a WF, the sub frame is different. You'll need a WF sub frame.

Thanks for all the help guys. Im actually driving home with it now. I picked it up from a guy in CT for $110. I have a NF so everything ended up great. Thanks again guys

Now that I have the blade does anyone have instructions or know how it goes on. I was toying with it for an hour or so and cant seem to line things up right. Does the subframe go on the inside of the frame foot pedals or the outside? When I put it to the outside it doesnt have enough clearance to click into the front of the frame. Im lost and cant seem to get it put together.

It goes on the outside of the frame. I think the manual is in the tech section or on the PDF site.

http://ccmanuals.info/pdf/

I have the same front blade and can put it on either my 122 or my 125 ( which has the quick attach brackets up front )

Here's the front attachment point
http://img.photobucket.com/albums/v7...p/DCP_4544.jpg

Here's where they attach at the footrest bar
http://img.photobucket.com/albums/v7...DCP_5803-1.jpg

What model do you have?

I have a 105 but when I put the subframe on the foot rest bar like in Jeffs picture the front attachment point comes up short and cant reach the quick attachment bracket in the front of the cub.

The top pic is mounted on my 125.

http://img.photobucket.com/albums/v7...cub_plow-1.jpg

Check to see if your arms were shortened.

After everyones help and reading the service manual Im glad to say I got the blade on and pushed around some dirt and brush. I overlooked a small detail and thought that the removeable 1/4" bar needed to be put in the quick attachment when the welded 1/2" nubs are supposed to and the 1/4" bar actual goes through the frame. Thanks again for the help guys, you guys always come through!