Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)
-   -   the 1811 (https://www.onlycubcadets.net/forum/showthread.php?t=48231)

darkminion_17 04-18-2017 11:52 AM

the 1811
 
4 Attachment(s)
I picked this up a few weeks ago, 500 hours on the clock.
PO said the driveshaft was vibrating, well I found the bolts for the motor were missing except one. So new bolts and got it to run after a carb clean and new kit.
Then I saw that they recycled some tire sidewalls for new rag joints, mud tires to be exact.
This is a new one for me, It will get fixed with correct ones.

Dirty Steve 04-18-2017 11:55 AM

Those mud flaps chunks are so money....:beatdeadhorse:

olds45512 04-18-2017 11:57 AM

Looks nice Lew, wanna trade for a 1050?

darkminion_17 04-18-2017 12:04 PM

Tim,
I still have yet to see it move under its own power, but I will think about it.

Sam Mac 04-18-2017 02:00 PM

If your gonna use mud tires for rag joints you need Mud tires for the tractor, every one knows that. Summer tire rag joints for turf's, can't believe what some PO's do. :LMAO1::ROTF1::ROTF2:

Alvy 04-18-2017 03:37 PM

I did that in a pinch/temporary deal as my FIL's mustang steer rag joints roached out in my driveway and needed to get it out of there. If you ever want to do something very difficult, try cutting those out of a tire and then drilling the holes........wow, never again

Texas Blues 04-18-2017 07:57 PM

Nice grab! The 1811 is a great machine. Congrats, TB

Oak 04-18-2017 08:43 PM

Nice find Lew.


:Spank:....you know that is a MTD machine and doesn't belong here.:biggrin2:

darkminion_17 04-18-2017 08:55 PM

Yes I know, I enjoyed the show....

J-Mech 04-19-2017 12:03 AM

Nice Lew!

Just no issues finding Cubs where you are is there. :BlahBlah:

1811's are great tractors!

ACecil 04-20-2017 08:28 PM

Good score on the 1811, Lew!

darkminion_17 05-06-2017 07:52 PM

2 Attachment(s)
I was able to install a good used driveshaft from another donor so that issue has been resolved, I did put in new ball bushings and roll pins, the rest of the shaft couplers were in good shape, So today I had some time to get the 1811 ready for mowing duties, installed the deck, and cut some grass.

olds45512 05-06-2017 08:17 PM

Looks nice Lew.:beerchug:

clay1811/44c 05-06-2017 09:21 PM

Wish I had one of those, oh wait I do. Looks good.

Rescue11 05-06-2017 09:27 PM

Notice how Tim keeps popping up? I think hes reeeeeally hinting at something :biggrin2:

olds45512 05-06-2017 09:54 PM

Quote:

Originally Posted by Rescue11 (Post 419412)
Notice how Tim keeps popping up? I think hes reeeeeally hinting at something :biggrin2:

Tim just bought a 784 to play with so Lew is free to keep his 1811 now.:biggrin2:

DieselDoctor 05-06-2017 10:01 PM

Nice job Lew, looks pretty sharp!

darkminion_17 05-06-2017 10:05 PM

How you making out on that 784 Tim?
Thanks Doc, not perfect, but it does the job.

Dirty Steve 05-06-2017 10:12 PM

Saw one like it on the Craigslist this afternoon. :bigthink: Good looking tractor.:beerchug:

olds45512 05-06-2017 10:32 PM

Quote:

Originally Posted by darkminion_17 (Post 419420)
How you making out on that 784 Tim?

Haven't had time to mess with it yet, hopefully i can tinker with it tomorrow after i finish up the 100.

zippy1 05-06-2017 11:07 PM

Looking good Master of Lew.:beerchug:
That's some fine looking lawn you have there. Nice and green, lush, and rather weed free...:bigthink:

ACecil 05-07-2017 11:54 AM

Quote:

Originally Posted by darkminion_17 (Post 419398)
I was able to install a good used driveshaft from another donor so that issue has been resolved, I did put in new ball bushings and roll pins, the rest of the shaft couplers were in good shape, So today I had some time to get the 1811 ready for mowing duties, installed the deck, and cut some grass.

The 1811 is looking great, Lew!


All times are GMT -4. The time now is 11:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.