3 pt and Brinly hitch
 

Got this on a trade, just making sure I got everything I need, other than a good cleaning up,to put on a 1650 frame, I have a hydro lift pump:bigthink:

Yup, looks like you have everything! :beerchug:

Good trade, Donny! Can't wait to see it on your 1650.

Donny, sorry for the delay in getting back to your PM. Here's some links for you.

Hitch and rear lift diagrams.

http://www.onlycubcadets.net/forum/showthread.php?t=4

Here's a link to the operators manual pages 16 and 17 have the hitch info.

http://www.onlycubcadets.net/forum/s...ead.php?t=4670

Here's the install manual for the hitch. The manual is for the 1x8/9 tractors but the info should be the same.

http://ccmanuals.info/pdf/WF%203PT%20Install.pdf

You'll have to remove one rear tire to get the top casting installed. You'll have to remove the tunnel cover as well.

everything is there! On your 1650 do you have the frame spacers welded on?

If no spacers you will need two Frankenstein bolts to attach the rockshaft with.

Thanks Guys, thanks for all the feed back, now to get time to put it all together, starting from frame up I hope, have a 1250 total tractor with a blown engine, hope it is just the rod, like He tought it was, also have a 1650 frame going to take two to make one, have a front blade and dual tires to put on it. But now to get time

Nice lift and hitch :beerchug: