Sleeve Hitch
 

I'm looking for the dimesions on a Brinley sleeve hitch, mainly I'm wanting to know how long the bottom U shaped hitch is. I also need to know how long the lifting bar is that goes from the hitch to the lift handle.

The Sleeve Hitch Adapter is 11" from front to back.

The holes for the draft bolts are 2-3/4" from center to center.

The "Sleeve" is 1" OD.

I have the measurements for the lift bar, somewhere. Need to know if it's a Narrow Frame or Wide Frame

Thank you Yosemite Sam, it's a narrow frame....

Might be a couple of days but I'll root around and find it.

Great post! I'm thinking about making a sleeve hitch too. I've got both wide and narrow frame CC's, but would put the hitch on my narrow frame 126 first.

Thanks!
Bill

Sam: Here are some renderings that were posted over the years, I'm pretty sure they are accurate. I hope it's what your looking for.

ssechrist: The first picture is a narrow frame lift bar, I can't find the numbers for a wide frame lift but still looking. :bigeyes:

I have only a diagram of a wide frame lift if it helps.