Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)
-   -   My new snow thrower (https://www.onlycubcadets.net/forum/showthread.php?t=28099)

Green stripe wide frame 10-26-2013 11:03 AM

My new snow thrower
 
4 Attachment(s)
I just picked up my QA42A last night and is in better shape than I thought. I picked it up for $60

cubcadet 10-26-2013 11:08 AM

great find

Jeff in Pa 10-26-2013 11:09 AM

I hope you have a receipt because at $60, you stole it :biggrin2:

Great deal :beerchug:

R Bedell 10-26-2013 11:31 AM

Quote:

I hope you have a receipt because at $60, you stole it

DITTO...Call the law:biggrin2:

finsruskw 10-26-2013 11:55 AM

Awesome buy!! Be sure and service it well before using it.
If the chain is rusty, it should be soaked in some good penetrating oil and lubed good before use. If in doubt, replace it. They should only run 15-20$ at any implement store worth their salt. Just take the old one with you so they can match it up.

Good luck!
You are gonna love that thrower. What Cub are Ya gonna put it on?
Will work best on a hydro or if you have a gear drive w/creeper.

jonjunk 10-26-2013 12:13 PM

Good deal! I just picked up one for $80 not adjustable tho

Green stripe wide frame 10-26-2013 02:33 PM

4 Attachment(s)
i put the snow thrower on my 125 and i have this issue of where the suports on the side rub on my grill frame am i missing something

ACecil 10-26-2013 10:51 PM

Nice score!

Diz Jr. 10-26-2013 10:56 PM

Nice find Green stripe wide frame :beerchug:

Cub Cadet 123 10-27-2013 11:26 AM

Quote:

Originally Posted by Green stripe wide frame (Post 222815)
i put the snow thrower on my 125 and i have this issue of where the suports on the side rub on my grill frame am i missing something

It kind of looks like that pin in the arm has two washers on it, if so then you might try removing one of them. Make sure that all of your bolts on the grill and frame are tight in that area--see if you can make some small adjustments on them to re-center your front nose piece, if you can spare room on the other side. If not, then you could put a longer pin in and use washers as spacers to adjust the arm out on the side to where it won't rub.

BTW: Sweet Deal!!!

Cub Cadet 123


All times are GMT -4. The time now is 06:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.