Only Cub Cadets - QA42A scraper blade

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)

- - QA42A scraper blade (https://www.onlycubcadets.net/forum/showthread.php?t=34388)

nutzboutoldies

09-01-2014 05:15 PM

QA42A scraper blade

1 Attachment(s)

Hi all, I'm beginning to get the 1450 ready for the upcoming winter. Last spring I noticed the scraper blade was bent/bowed. I was afraid housing was bent also. After removing the blade it appears the housing isn't to bad however the blade is bent pretty bad. Amy of you replaced the blade? It looks like it's not available. I can probably straighten the blade but I'm afraid the strength will be lost and it wouldn't last long. How have you guys dealt with this?

timbo2

09-01-2014 05:39 PM

A Machine shop could probably copy it close enough. Take it while it's still in one piece

That's what I did for the scraper on my snow blade in the past.

Mike in SD

09-01-2014 06:41 PM

Xtreme Motorworks has them,

http://xtrememotorworks.com/Parts%20.../CC-26-002.htm

HTH
Mike

Cub Cadet 123

09-01-2014 09:01 PM

Sometimes, if they aren't too bad then they can be reversed and the other side used. You can also purchase another one, as was mentioned ....they are also on Ebay, etc..

Cub Cadet 123

All times are GMT -4. The time now is 05:01 AM.