Carry all
 

Had an idea the other day of building a 3pt carry all for my cub. Took some scrap steel and welded things up yesterday.

Attachment 66744

Also remembered old cheap trailer. Built carry all to fit trailer bed. Still have to shorted the trailer bed but think things will work well.

Attachment 66745

Photo of trailer on carry all. Will cut down soon.

looks like a cool setup

Nice work! :beerchug:

X2 How about a closer pic? This got me thinking about a mounted wood hauler for the winter. I have been loading a wheelbarrow and pushing it into the basement, takes one full one a day. The cubs just rest there in the winter so the 128 might just use something like that. Fill it and back it in right beside stove. I am betting I could haul two days worth on it. Turning a key sounds a lot better than pushing a wheelbarrow!!

looks like you could use it to move pallets around too.

Great idea. Looks almost like a standard class 2 fork carriage where if it actually was the forks are adjustable side to side, and then wow carrying a pallet if fire wood in at a time would be awesome. Or put the cheap trailer on with a pivot so it can dump, homemade Johnny bucket

Photo looking at connection.

Attachment 66792

Basically 1.25" square stock with angle iron legs.

The lower pins are mounted to a 3/8 inch thick angle iron which is welded to the square stock.

Yes it fits a pallet and I have already used it to move a empty water tank (built in pallet).

Would have to be a small pile of wood on the pellet for the cub to lift. Also my frame is a little light duty to lift more than a couple hundred pounds.

Attachment 66793

mover
 

that may be used to move some round hay bails to.
:bigthink: