K321 crankshaft
 

I have a crank from a 14 hp K321 that is worn just past the limits of being usable with a std. connecting rod. It's about .002 under. I have searched repeatedly here in NY for a shop capable of grinding a small crank without luck. Does anyone know of a shop that they could recommend that I could ship the crank to? Perhaps a shop that you have used with good results? I welcome any suggestions you might have. Thanks in advance for your help. Stan

We send all our cranks to Pittsburgh crankshaft, they do about 30 cranks a year for us and we've never had an issue. Turn around time when I sent my k301 crank was about two weeks

.http://www.pghcrank.com

Effingham Regrind does all mine..... and not just Kohlers. They have well over 50 years in crankshaft work.

Talk to Dean:
http://effingham-regrinding.com/

cub
 

Automotivemachine Inc Oakland Md. talk to Scott. Mike

Hey there is a machine shop not 1/8 mile from the Living History museum. It's called precision automotive. The guys name is Joe and he does fantastic work. I have had many Kohlers bored out at his shop as well as crank shafts turned. Get a hold of me and we can set something up. I as well have a couple cranks that need turning. We might be able to get a little discount having 3 done at a time. PM me your ph#

PM sent with phone number