Only Cub Cadets

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)
-   Implements and Attachments (https://www.onlycubcadets.net/forum/forumdisplay.php?f=16)
-   -   Garden Plow Guidance (https://www.onlycubcadets.net/forum/showthread.php?t=49512)

Workinprogress 07-27-2017 06:58 PM

Garden Plow Guidance
 
1 Attachment(s)
Started looking for a used garden plow for my cub. I know nothing about plows.

I found one but the setup seems a little different than the Brinly ones I see elsewhere. The angle adjustment is by the front of the plow instead of in the rear.

Anyone used a plow like this?

Should I just keep looking for a brinly or other brand?

Any suggestions would be appreciated. Thanks

Attachment 86664

jaynjeep 07-27-2017 11:21 PM

I think that is a Sears or Roper plow.. It should work just as well as the Brinly.. doesn't really matter where the adjustment is.. That controls the angle on the point and helps determine how deep the plow runs.. If you shorten that upper link the plow will run deeper.. if you lengthen it should run more shallow.. Same principle on the brinly or any turn plow (moldboard plow) for that matter! They are easy to use and a lot of fun to plow with when set up and adjusted correctly!:beerchug::beerchug:

zippy1 07-27-2017 11:40 PM

At least hook it up, and see how it "looks" on fit. But as Jay said, there all the same, for the most part.:bigthink:
Shine the face up, oil up the adjuster, and give it a whirl...:beerchug:

cubs-n-bxrs 07-28-2017 07:47 AM

I've seen numerous plows like that at the different plow days that I have been to and they work just as good as a Brinly. If the price is right grab it. It's all a matter of getting them dialed in. :beerchug:

Workinprogress 07-28-2017 02:19 PM

Asking $100 but they have been trying to sell it for a month.

Merk 07-28-2017 03:11 PM

I owned and plowed with a plow like that one. My plow has a Sears id tag on it.

It is a good plow as long as the point is good and the coulter turns.

A good way to if it has a good point is to put the plow on a cement floor and check to see how much gap there is behind the point.

Bad thing about the plow there is no replacement parts for it.

jaynjeep 07-29-2017 12:46 AM

Quote:

Originally Posted by Workinprogress (Post 428844)
Asking $100 but they have been trying to sell it for a month.

That is a good price.. you won't find a Brinly that cheap

Workinprogress 08-04-2017 05:13 PM

Thanks for all your help!

I picked up the plow today. Turned out to be in pretty good shape. Angle adjuster was frozen but after some pb blaster and a pipe wrench was able to free up the adjuster.

Time to weld up a sleeve hitch adaptor for tractor!

Workinprogress 08-04-2017 07:55 PM

2 Attachment(s)
Here are a few close up photos of the plow.

Attachment 86766

Attachment 86767

jaynjeep 08-04-2017 11:04 PM

Glad you picked it up!!:beerchug: Time to turn some dirt and shine it up!!:biggrin2: and send us some pictures!:beerchug:


All times are GMT -4. The time now is 03:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.