Only Cub Cadets - Can you mount an international front blade to an 1861

Only Cub Cadets (https://www.onlycubcadets.net/forum/index.php)

- CCC/MTD Cub Cadet built Tractors (GT) (https://www.onlycubcadets.net/forum/forumdisplay.php?f=10)

- - Can you mount an international front blade to an 1861 (https://www.onlycubcadets.net/forum/showthread.php?t=52678)

jml12305

07-05-2018 11:10 AM

Can you mount an international front blade to an 1861

I just picked up a nice 1861 from a guy and a nice rolling chassis for parts. But I had a 1250 and i was wondering if you can attach the front blade from the international built Cubs to the 1861?

darkminion_17

07-05-2018 09:02 PM

yes you can.
But you need to do a few things to the sub frame.

J-Mech

07-05-2018 09:20 PM

Quote:

Originally Posted by darkminion_17 (Post 459354)

yes you can.
But you need to do a few things to the sub frame.

Do you "have to" though....? I don't think you do.... :bigthink:
Pretty sure it will work without mods. Need a different lift rod for sure.

jml12305

07-05-2018 11:36 PM

Ok what do I need to do?

J-Mech

07-06-2018 12:36 AM

Quote:

Originally Posted by jml12305 (Post 459376)

Ok what do I need to do?

Mount it up.

Sam Mac

07-06-2018 06:36 AM

1 Attachment(s)

You'll probably need to grind the snow plow mounts to clear the axle stop limit bolts on the Cyclops.

CADplans

07-06-2018 08:21 AM

You need a special lever for the right side of the tractor to be able to lift the blade,,

This is a pic of my "DIY" lever that I made for my 1861,,,

http://i1104.photobucket.com/albums/.../1861/lift.jpg

I put two lift holes in it so that I could vary how much an attachment lifted,,

Sam Mac

07-06-2018 03:58 PM

1 Attachment(s)

I have one of these from Xtreme that I will sell you for $100.00 shipped. It allows you to use a blower or a plow.

All times are GMT -4. The time now is 03:01 PM.