Quote:
Originally Posted by Dave R
I would like to fabricate a 3 point hitch for my 149. I think I can make one that will work, however, I need to know the length of the lift bar, and how far back from the front the slight bend is made. I plan to make the with a piece of pipe and weld the lift arm on it. I have the installation instruction as outlined in a brochure but there are no dimensions on anything.
I can cut the rod that extends through the frame and put a pipe sleeve over it and then weld the lift lever and another pipe to hold the protruding left piece onto it.
Anyone with some dimensions would sure be appreciated.
Dave in SW Missouri
|
Do you want a Cat 0, or a sleeve hitch?
Here is a thread for a NF, with dimensions.......
NF 3 point.
Here is athread for a Cat 0......
Cat 0 on a 1450
Or, get a hold of Patton, he's has a little better price than E-Bay. Bottom line, if you want stuff, it costs money. And, from my experience, it's usually cheaper to buy, than like stated before, trying to "reinvent the wheel". It's really not that much money.