Only Cub Cadets

PLEASE PATRONIZE OUR SPONSORS!

CC Specialties R. F. Houtz and Sons Jeff in Pa.

P&K Cub Cadet Machtech Direct

Cub Cadet Parts & Service


If you would like to help maintain this site & enhance it, feel free to donate whatever amount you would like to!




Go Back   Only Cub Cadets > Cub Cadets > Implements and Attachments

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 06-01-2015, 09:59 PM
cd36c cd36c is offline
New Member
 
Join Date: Apr 2015
Location: MB
Posts: 3
Default Time to swap tiller

I have a 782 and I'm looking to track down a tiller for it. I have a few leads but was wondering how long it takes to swap between the mower deck and the tiller. It looks fairly involved but wanted to know how long I could expect to take to swap it. I'm guessing it would be an hour to swap from one to the other does that seem accurate?

A local former cub dealer has I believe a 1450 with a tiller on it and that's it. They are asking 950 though which is alot for a tiller. Just trying to decide if having a dedicated tiller machine would be better than swapping back and forth on my 782. Thanks!
Reply With Quote
  #2  
Old 06-01-2015, 11:56 PM
cubby102's Avatar
cubby102 cubby102 is offline
Grand Member
 
Join Date: Mar 2012
Location: Kewanee, Illinois
Posts: 1,974
Default

I never timed it but I can tell you I now have more then one cub so I don't have to swap anymore !
__________________
No more cubs. But never fear there will be more
Reply With Quote
  #3  
Old 06-02-2015, 12:41 AM
zippy1's Avatar
zippy1 zippy1 is offline
Grand Member
 
Join Date: Sep 2010
Location: Wisconsin
Posts: 7,833
Default

That swapping implements get's old quick.
If you have room, it's best to have one for each job. Helps not wearing out the pins taking them off and on all the time also
__________________
Make the best of each day ,
Todd

Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439
(O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs
Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk
They can't all be turn key!
Reply With Quote
  #4  
Old 06-02-2015, 06:49 AM
Roy Najecki's Avatar
Roy Najecki Roy Najecki is offline
Senior Member
 
Join Date: May 2010
Location: Rhode Island
Posts: 158
Default

I've done the tiller to mower deck swap a few times and an hour is about what it took me. Especially if you are working alone. $950 for a 1450 with a tiller might be a good price, especially if the engine cradle and exhaust box have new ISO rubber and aftermarket bracing. I agree that it is way too much money if you only need a tiller which in my area can be found for about $350.

Having dedicated tractors for each implement is the way to go if you have the room to store them. That is my plan: my two 82's for me and wife to mow the lawn (we do that together), and the 149's/1450's for the tiller, landscaping rake-front blade, front bucket-backhoe (someday), and one 'bare' for use with the trailer to haul firewood out of the back woods.
Reply With Quote
  #5  
Old 06-02-2015, 10:02 AM
restore49 restore49 is offline
Member
 
Join Date: May 2010
Location: Maine
Posts: 93
Default

How many times do you Till? - I tend to use the Cub to till in the spring and fall - so the time to swap is no big deal and not all that difficult. Bob
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:42 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.

MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.

This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC

All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.

Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.