![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#11
|
||||
|
||||
|
Looks great I need something like that.
![]() Now on with the concrete, I do this for a living so there is nothing like the smell of concrete in the morning,always plan ahead what you want to add to your shop.Putting in a lift requires extra concrete under the support pillars,ask the lift company what is required.Pour at least 6" of concrete over the floor and put a vapor barrier under it first,under that at least 4" of 3/4 stone.Include expansion joints around the perimeter and section off the floor with them also.Plan on at least 16 to 17 yards of concrete for your building,that is two trucks so it may be better getting at least 3 helpers,unless you are not poring it all at once. Doing 1/2 the floor one weekend and the other on another is a little easier if you have less help.We always use fiber mesh concrete,no need for wire mesh in the floor.It very strong stuff.Most of your power,tel and cable should come in from outside the building through the wall.It is up to you how you want to run it throughout the building. And no I will not come to help.
__________________
Up to 533 and counting... I give up updating my profile! |
|
#12
|
||||
|
||||
|
Great looking shop. They fill up quick and are never big enough.
![]() Lew, I'm not a concrete man but, when they pour walls down here in the south the fiber sticking out will cut you to pieces. Did that change or does the finish work take off what is sticking out?
__________________
This ain't no hobby....it's an addiction |
|
#13
|
||||
|
||||
|
Oak,
On concrete floors we have them add the finer stuff.It looks like wool fibers.
__________________
Up to 533 and counting... I give up updating my profile! |
|
#14
|
||||
|
||||
|
Quote:
I'll definitely be doing half the floor at a time. I have to buggy the crete about 200' as the truck wont be able to get to the building.. The lift I have (bought used) has spread footing, I was thinking of using sono tubes where the lift bolts to the floor. Mono pouring the tubes with the floor. Think that'll work? |
|
#15
|
||||
|
||||
|
Nice TOY box, Your buddies will know where to find you now
__________________
Make the best of each day , Todd ![]() Original's Face Lift thread.http://www.onlycubcadets.net/forum/s...ad.php?t=34439 (O) Start to Finish video.https://www.youtube.com/watch?v=GAoUNNiLwKs Wheel Around videohttps://www.youtube.com/watch?v=XUL-m6Bramk They can't all be turn key! |
|
#16
|
||||
|
||||
|
Yes that will work.Those concrete buggys are pretty cool just watch out when you turn.
__________________
Up to 533 and counting... I give up updating my profile! |
|
#17
|
||||
|
||||
|
if i was you when you put the floor in i put heat tubes in so the floor is warm all the time it make it soooo nice in the winter and it eazyer to heat the whole place
|
|
#18
|
||||
|
||||
|
The most important accessory is a large fan (I have a 48" 4 blade out of a paint booth).
Aim the fan at the door, crank up the fan and a leaf blower, and the cubshack will get clean in a hurry.
|
|
#19
|
||||
|
||||
|
Concrete is in!!
__________________
----------------------------------- 106 Needs a clutch-------107 (Lent to my brother) 123 w/hydro lift & qa36--126 w/creeper and lift 127 restored--------------129 50" mowin machine 129 w/hydro lift-----------147 plow horse w/tiller 149 auction score---------782 KT17SII |
|
#20
|
|||
|
|||
|
Awesome news!
|
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.