![]() |
PLEASE PATRONIZE OUR SPONSORS!
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
I am wondering what kind of GPM and PSI the 782 ported hydro can produce? I believe that I was told that they are set at 550psi, but that they can be turned up to 1000psi. I have been trying to find the answer, but cannot. I am thinking one of these are in my future on the 882
http://www.northerntool.com/shop/too...5410_200395410 http://www.northerntool.com/shop/too...5528_200365528
__________________
Dale 147-Restored___________________882 Diesel Hydro lift (not installed)___________44" Deck 48" Deck_______________________QA-42a/b Snowthrower Rear lift ________________________XMW cat-0 rear lift Model 2 tiller____________________12" cat-0 Brinly plow |
|
#2
|
||||
|
||||
|
Link isn't working for me ,what are you looking at.
__________________
cub cadets : orignal w/ mower,orignal w/ push blade, orignal w/BB-36 snow thrower,72w/creeper,100, spirit of 76,76,55, 95 Electric,107,2-125 ,Johnson TC-10 loader, ,127,149,1100,282,382 hydro,382,482,2-IH 582,682 w/ spring blade,2-782,782D,1282,982,1782 super, and ,2-custom built 582 puller,2-narrow frame pullers,and 1-stock 582 puller
|
|
#3
|
||||
|
||||
|
You need a dedicated pump to run that.
|
|
#4
|
||||
|
||||
|
The psi on the 82 series is 800-900 psi. The 123-1650 400-550
__________________
1971 128,3pt,ags,rebuilt motor,headlights 1988 1812,dual ports 1966 122,creeper,3pt,ags,sa,headlights,restored 1st place at RPRU 2013 1966 123,3pt,brinly spring assist 1973 108 1968 125 Attachments:QA36A,wfblade,2 nf blades,brinly disc,a cultivator,plow,homemade wrecker boom with 2000lbs winch,ih weights,50lbs weights,2IH windbreakers |
|
#5
|
||||
|
||||
|
You would need a separate pump, like Matt said. Also you would put more wear on your tractor than is necessary. It just does not take that much horsepower to split wood.
__________________
1572, 1864 x2, 1810 x2, 1863 & GT1554(Dad's Ole Mowers), 1811,782D, 1872 x2, 782DT(Sold), 3235, 1860, 1772 with 3-point and Turbo. |
|
#6
|
||||
|
||||
|
Just curious what is the gpm on the 82? And what about my 1872 psi/gpm?
__________________
To many ideas, not enough time..... Cub Cadet 147 2050041u340160 Cub cadet 129 main mower Cub Cadet 1811 Cub Cadet 1872 with 60" CCC deck. Many Mower Decks, Snow Thrower, Tire Chains and Weights, Rotary Tiller 1, Brinly Sleeve Hitch, Brinly 10" and 12" plow, Johnny Bucket Jr.,42" QA NF Dozer Blade. |
|
#7
|
||||
|
||||
|
Although the pressure is adjustable, the output of the charge pump is low. Just look @ how slowly the deck raises/lowers and figure how much slower a larger cyl will operate.
yea it will work and split wood but I think you could have lunch before it would. cycle |
|
#8
|
||||
|
||||
|
There's 3 different charge pump displacements (.19, .3, or .33 in3/rev) given in the Sundstrand service manual, but I think it's the smallest one, so the flowrate would be about 3GPM at 3600 RPM, I think. That would be true for any of the ported hydros used in a CC GT...they are all essentially the same.
Regardless, you need a dedicated 5+GPM pump to run anything but a small auxiliary cylinder. The charge pump is only for intermittent use actuating cylinders and stuff. You'd probably ruin a hydro pump by running a loader or logsplitter off of it. |
|
#9
|
||||
|
||||
|
Kind of what I figured. I like the thought of not having a different engine for everything I want to do (generator, log splitter, ect) Especially for as often as I need them which is the same reasoning behind having attachments for the tractors in the first place. I may buy one and then just run a pump off the pto. I would really like to find a log splitter with a blown engine, or at least find the I beam and what not.
__________________
Dale 147-Restored___________________882 Diesel Hydro lift (not installed)___________44" Deck 48" Deck_______________________QA-42a/b Snowthrower Rear lift ________________________XMW cat-0 rear lift Model 2 tiller____________________12" cat-0 Brinly plow |
![]() |
|
|
Cub Cadet is a premium line of outdoor power equipment, established in 1961 as part of International Harvester. During the 1960s, IH initiated an entirely new line of lawn and garden equipment aimed at the owners rural homes with large yards and private gardens. There were a wide variety of Cub Cadet branded and after-market attachments available; including mowers, blades, snow blowers, front loaders, plows, carts, etc. Cub Cadet advertising at that time harped on their thorough testing by "boys - acknowledged by many as the world's worst destructive force!". Cub Cadets became known for their dependability and rugged construction.
MTD Products, Inc. of Cleveland, Ohio purchased the Cub Cadet brand from International Harvester in 1981. Cub Cadet was held as a wholly owned subsidiary for many years following this acquisition, which allowed them to operate independently. Recently, MTD has taken a more aggressive role and integrated Cub Cadet into its other lines of power equipment.
This website and forum are not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: http://www.mtdproducts.com. The information and opinions expressed on this website are the responsibility of the website's owner and/or it's members, and do not represent the opinions of MTD Products Inc. IH, INTERNATIONAL HARVESTER are registered trademark of CNH America LLC
All material, images, and graphics from this site are the property of www.onlycubcadets.net. Any unauthorized use, reproductions, or duplications are prohibited unless solely expressed in writing.
Cub Cadet, Cub, Cadet, IH, MTD, Parts, Tractors, Tractor, International Harvester, Lawn, Garden, Lawn Mower, Kohler, garden tractor equipment, lawn garden tractors, antique garden tractors, garden tractor, PTO, parts, online, Original, 70, 71, 72, 73, 76, SO76, 80, 81, 86, 100, 102, 104, 105, 106, 107, 108,109, 122, 123, 124, 125, 126, 127, 128, 129, 147, 149, 169, 182, 282, 382, 482, 580, 582, 582 Special, 680, 682, 782, 782D, 784, 800, 805, 882, 982, 984, 986, 1000, 1015, 1100, 1105, 1110, 1200, 1250, 1282, 1450, 1512, 1604, 1605, 1606, 1610, 1615, 1620, 1650, 1710, 1711, 1712, 1806, 1810, 1811, 1812, 1912, 1914.